Potable Water Sch80 Grey Solvent Weld Belled End

Potable Water Sch80 Grey Solvent Weld Belled End

Pacific Plastics IPS Schedule series of PVC pipe is produced for use in the pressure applications in which the maximum operating temperature is 140°F. …

Download Spec Sheet
Category:

Specification

Pacific Plastics IPS Schedule series of PVC pipe is produced for use in the pressure applications in which the maximum operating temperature is 140°F. The compound is PVC 1120 Type 1 Grade 1, with a cell class of 12454B, per ASTM D1784.

Sch80 is produced in strict compliance to ASTM D1785 and is listed with NSF, and complies with NSF/ANSI Standard 14 and Standard 61.

Sch80 pipe is installed per ASTM D2855. The joints should conform to ASTM D2672, the solvent cement to ASTM D2564 and the primer to ASTM F656.

Sch80 is for use in the Idustrial applications:

  • Sizes ½” – 12” are produced in Grey color, 20 foot lengths and Belled End.

The outside diameter and wall thickness of Sch80 pipe are measured in accordance to ASTM D2122 and are shown in the following table:

Size OD T C PSI
1/2 0.840 0.109 1.00 850
3/4 1.050 0.113 1.25 690
1 1.316 0.133 1.50 630
1 ¼ 1.660 0.140 1.75 520
1 ½ 1.900 0.145 2.00 470
2 2.375 0.154 2.25 400
2 ½ 2.875 0.203 2.50 420
3 3.500 0.216 3.25 370
4 4.500 0.237 4.00 320
6 6.625 0.280 6.00 280
8 8.625 0.322 6.00 250
10 10.750 0.365 7.50 230
12 12.750 0.406 8.50 230
12 12.750 0.406 130

OD – Outside Diameter
C – Approximate Bell Depth
T – Wall Thickness
PSI – Pressure Rating

Certification

This is to certify that, in this category of PVC pipe, all the products manufactured by Pacifi c Plastics have been inspected, sampled and tested in accordance with the following specifi cations and have been found to meet or exceed the requirements of those specifi cations.

Raw Materials

  • PVC1120 Type1 Grade1
  • Cell Class 12454
  • ASTM D1784 Specifi cation for Rigid PVC Compounds
  • NSF Listed

PVC Pipe

  • Sch80 Grey
  • Solvent Weld Belled End
  • ½” – 12” IPS
  • ASTM D1785 Specification for PVC Pipe
  • ASTM D2672 Specification for IPS PVC Pipe Joints using solvent sement
  • Complies with NSF/ANSI Standard 14
  • Complies with NSF/ANSI Standard 61

Part Numbers

Size Sch80 Bell
1/2 AB-80
3/4 BB-80
1 CB-80
1 ¼ DB-80
1 ½ EB-80
2 FB-80
2 ½ GB-80
3 HB-80
4 IB-80
6 JB-80
8 KB-80
10 LB-80
12 MB-80

Price List


Size Sch80 Bell
1/2 106.00
3/4 142.00
1 210.00
1 ¼ 288.00
1 ½ 348.00
2 494.00
2 ½ 738.00
3 984.00
4 1440.00
6 2746.00
8 4184.00
10 6432.00
12 8882.00

Loading Chart - IPS Pipe 20'

Size Ft/L L/T Ft/T
1/2 7,200 44 316,000
3/4 8,000 32 256,000
1 5,500 30 165,000
1 ¼ 4,400 28 123,000
1 ½ 3,360 28 94,080
2 2,000 28 56,000
3 1,100 24 26,400
4 680 24 16,320
5 520 16 8,320
6 440 16 7,040
8 280 16 4,480
10 240 12 2,880
12 120 16 1,920

Weights - Potable Water SCH80

Size Sch80
1/2 20.7
3/4 28.1
1 41.5
1 ¼ 57.0
1 ½ 69.0
2 98.0
2 ½ 146.2
3 195.0
4 285.5
6 544.8
8 830.0
10 1276.0
12 1762.0

Attributes

Color

Fitting

Purpose

Related products

Sw Purple

Reclaimed Water SDR’s Purple Solvent Weld
Sewer Sdr35 Green Gasketed

Sewer SDR35 Green Gasketed
G Pip White

PIP SDR’s White Gasketed
Sw Conduit

Electrical Conduit Sch80 Grey Solvent Weld